Drug testing

Safely Decorating Your Kids Bedroom

? Wall Decorations:

Never place a wall hanging, picture, poster, or any other decoration on the wall within the baby's reach. Remember that once the baby is able to stand and reach up these things can be hazards. They can knock wall hangings or pictures off the wall, and hit themselves with them. If it is a picture in a frame with glass, if they were to knock it down, it could break and shatter, causing severe health hazards. If it is something as simple as a poster, it can still be dangerous, because they can rip off a piece of it, and put it in their mouth, leading to choking.

? Bumpers:

It is always a good idea to use bumpers for a baby's bed, but it is equally important to make sure that the bumper and all other kids bedding fits the crib properly. Bumpers are used to prevent the baby from getting their arms and legs between bars, or between the crib and mattress, and can provide much safety this way, but if it does not fit properly, it can pose more concerns than before, because not only will it allow the baby to get these appendages in these places, it can essentially pin them there.

? Musical Mobiles:

These are excellent tools on occupying your baby, and adding decoration to the bedroom, but they need to be used in a safe manner. Once a baby begins pushing up on their hands and knees, the mobile should be placed at the baby's feet, and once they start pulling up, it can pose a strangulation hazard, so you may want to remove it altogether.

? Pillows, Blankets and Kids Bedding:

Babies only need one lightweight blanket on them while they are sleeping, such as a receiving blanket. The blanket should only reach as far as their chest, and it should be tucked in tightly around the baby, possibly either around the crib. They do not need pillows or extra blankets. A pillow or an extra blanket can suffocate a child, especially an infant that can not move his head away quickly enough. This also applies to stuffed animals in the crib.

? Crib Sheets:

It is very important that the only sheet you put on a crib be a fitted sheet, and that it fits securely around the mattress. If the elastic won't hold it on, and it comes loose and slides up onto the bed, it can get tangled around the child and suffocate her. Washing all kids bedding:

Do not forget to wash all sheets and blankets before putting the infant in the bed. They can be washed in regular laundry detergent, but to avoid any allergies or irritants on baby's soft skin from it, sometimes it is best to use baby detergent.

Infants should ALWAYS sleep in a crib which meets current federal and ASTM standards.

? Mattress

It is also important to pay close attention to how the mattress fits into the crib. The tighter it fits, the better it is, because this leaves less room for them to stick a hand or finger, or any other body parts. Crib mattresses may seem rather hard to an adult who is accustom to a soft bed to sleep on, but they are made this way for a reason: safety. This keeps them from suffocating themselves, and is the same reason it's never good to let an infant sleep on an adult's bed, or on a pillow, or even a comforter. The only thing that should be under the baby on a mattress is a fitted sheet, and possibly a mattress pad and/or waterproof pad.

? Sleeping Position

A healthy infant should always sleep on their back, unless you are directed otherwise by a physician. Even without a pillow or fluffy blanket in the bed, a baby on their stomach can get stuck face-down and not be able to move their head to the side to get air, leading to suffocation.

? Mini Blinds and Curtains

Just as with wall hangers and pictures, it is very important not to ever place a baby's bed near a window with mini blind or curtains. The cord from mini blinds pose a strangulation risk, and they can pull on curtains, pulling themselves out of the crib. Either of these can also cause endangerment if the baby pulls on it hard enough to pull it down on top of them.

Article by Avid Amiri - President of The Kids Bedding Company. Please visit Kids First to learn more about kids bedding and find the best styles and prices on the latest kids bedding designs.

chicago transportation service

In The News:

Tracking the progress of the third party testing we at PES are coordinating along with U-Plug Products LLC, of their 2 kW U-Plug magnet motor that is a 24"x6" portable cylinder weighing 20 pounds, expected to cost 2,000 USD. We want to run it three times longer (21 hours) than what the best batteries available could provide. (PESWiki; February-April 2016)

Pre-launch video announces a new LENR website coming March 1, 2016 at http://LookingForHeat.com The video is very well done as an entertaining piece that hopefully will go viral. (Free Energy Blog; February 21, 2016)

It's not easy to find a qualified testing agency that is also willing to sign off on something that appears to defy our existing understanding of the laws of physics. U-Plug has agreed to allow for a group of us scientists, including at least 3 PhDs to go test their unit and publish our report. (PESN; February 20, 2016)

So that this is quite clear, this is a test on a Regular Torch. NOT the ELFE flashlight. This is to compare them. 2 x NiMH AA 1.2v Battery's in a Regular Torch with a Halogen Bulb. Load is 2.8v and 0.85amps. (PESN; February 17, 2016)

Video explains the scientific principles behind how the ELFE flashlight harnesses endless free energy from the environment (Earth's magnetic field), which works better in some regions than others. It also shows the insides the torch. Uses the word "antennae," as one of the components. (PESN; February 14, 2016)

"The OPhone contains a capacitor that directly powers our phone. During extensive use this capacitor may become discharged, however this capacitor is being constantly trickle charged by Orbo. So after a period of time the capacitor will be recharged and the phone will be functional again. In essence the phone is charging itself." (Free Energy Blog; February 13, 2016)

The company that has figured out how to harness the earth's magnetic field to produce usable power and has been selling the ELFE flashlight (two more customer reports), is now developing a 3 kW generator. In two weeks, they are holding a business meeting for international distributors. (PESN; February 12, 2016)

Illinois company is gearing up to manufacture a 2 kW (115 volts, 17.3 amps) magnet motor that is load-following, portable, 24"x6" tube, weighing 20 pounds, very quiet, with 3-year warranty but expected to last at least 20 years with zero maintenance. Third-party tested. MSRP 2000 USD, beginning March, 2016, through distributors. (PESWiki; February 11, 2016)

The government agent who worked on this technology five decades ago, that is similar to Professor Steven E. Jones' Joule Ringer, thinks it is conceivable that we could eventually scale this solid state technology up to have a device the size and price of an air conditioner providing 20 kw. (PESWiki; February 9, 2016)

Nagendra Singh in Mumbai, India, informs us that they have built five of these and have two running for customers presently, in the 40 kVA range. "Presently it is too [expensive], costing 3200 USD per kva below 30 kva." (PESWiki; February 8, 2016)

The SunCell is described as a solid state "Sun in a Box." A 200 kW module would weigh around 250 pounds, with energy production cost being around 1 cent/kwh, so return on investment could be ten days. They are expected to be available commercially by Q1, 2017. (PESN; January 6, 2015)

"Today I received my Elfe Flashlight and it works. Time will tell if it meets the claims of automatically recharging, when depleted. If it holds, the claims a real breakthrough in FE technologie would have been accomplished." -- German customer (PESWiki; February 6, 2016)

The phone battery indicator stays near full even with heavy usage throughout the day. (The battery is charged by the internal OCube that pulls energy from the wheelwork of nature, solid state). (PESWiki; February 5, 2016)

The capacity of the Proton-3ND (Proton -3 Nano Diffusion) battery is projected to be 44 times the capacity of lithium batteries. Electric vehicles with these batteries would have more power and much more mileage at no extra charge. (PESN; January 4, 2016)

HH2 water fuel cell creates pure hydrogen off a 9-volt battery. This was a big diesel HH2 cell that was tested on a 16-liter Cat engine for CARB testing; yet it ran on very low amps and a low 9 volts. (PESWiki; February 3, 2016)

A former U.S. Government worker describes his effort to bring to public awareness (by highlighting things presently in the public domain) energy and anti-gravity technologies that the government had operational 50 years ago but has kept from the public. (PESN; February 2, 2016)

Imagine an incandescent bulb that is actually more efficient than LEDs! Well, it actually exists (MIT) and it does so by recycling light. (Free Energy Blog; February 2, 2016)

SMBC-Comics.com has posted a fun spoof on our skeptics. (Free Energy Blog; February 1, 2016)

"OK, so a lot of people are asking what's the difference between an Orbo power cell and traditional batteries." Batteries store energy, Orbo generates energy, then trickle charges a lithium ion battery.] (Free Energy Blog; February 1, 2016)

Mr. Keshe is as misleading in the field of free energy as he is regarding me. That has been my experience the years I've been exposedto his work. He takes something and blows it so far out of proportion that it barely resembles the fact from which it was extrapolated into infinity. He demands: "Close PESWiki now." (PESWiki; January 31, 2016)

They have achieved solid state operation using an electromagnetic pump to spray the molten silver between the electrodes for the 1000/second continuous pulsing for continuous power production. (Free Energy Blog; January 29, 2016)

Safely Decorating Your Kids Bedroom

Interior Design & Decorating Interior Design & Decorating